RAD-501 RADIATION MONITOR

RAD-501 Radiation  monitor  is designed to detect and display the radiation in a multipurpose environment with high flexibility of working with  different detectors..

The pulses  received from the detector to be connected via the plug-in connector   at  the front panel   are shaped and cleared  of noise  and the results thus obtained are displayed on the LCD graphic display . While all its functions can be controlled by connecting to an external computer, it’s also possible to obtain all the measurement results stored in the memory through a serial port. It can make measurements within the range of 0,5 uSv/h -1 Sv/h (50 uR/h to 100 R/h) depending on the span of the detector.

With the help of the keyboard on the front panel it is possible to control all the functions of the system easily. Automatic scanning and calibration operations are enabled by pressing the Function  keys.

It enables quantitative as well as qualitative measurement of radiation energy. Thus it is possible to measure and record only the selected type of energy. Single channel analyzer width can be set with the keyboard.

Differential and integral measurements are possible. RAD-501 Monitor possesses a always running  BIT (Built in test) function. It allows continuous testing and control of all system functions. The rate of battery charge and radiation concentration can be continuously monitored by means of a bar graph displayed on the screen.
RAD-501 is a multi-purpose  and user friendly radiation monitor. It’s detector is designed such as to ensure alpha, beta, gamma and X-ray measurements are made with a high degree of precision. System performance is determined in conformance with the level of sensitivity of the detector used.
A bargraph  which enables the digital display of radiation intensity is provided.
The Monitor is a portable and compact device. While it can function as a ratemeter  and  also be used as a instantaneous radiation intensity meter . It can also provide the cumulative dosage value . It emits a sound signal audibility of which changes with the intensity of the radiation level. The frequency of sound also changes in response to the different levels of radiation intensity.


 

The Software developed  carries out the following  “smart” applications :

• Calculates the average values of the measurements and displays it on the screen as a bargraph
• Enables the Monitor ve the detector to automatically test itself
• Automatic selection of the Display Mode
• Automatic selection of measurement area
• Selection of different measurement modes
• Automatic  recording of dose accumulation
• Automatic stopping and storage of peak dose value
• Manual programming of threshold alarm
• Low battery alarm
• Over-flow alarm
• Manual selection of functions
• Calibration  for detector efficiency

• Average Count per Second (cps) or µSv/h,Sv/h
• Average Count per Minute (cpm) or µSv/h
• Intergral Accumulation mode ( all counts above the threshold energy)
• Differential Accumulation Mode (all counts within the window )
• Possibility to reset any time when working at the Accumulation Mode
• Counts taken during the entire period specified
• Counts taken until preset time or count  are reached

• RAD-501 can work with

§         NaI , CsI(Tl) crystal scintillators

§          CTZ crystal 

§         Also operates with the GM  detector.

• Ease of Use- A user-friendly front panel with a large display and touch-screen buttons, supported by excellent software.
• Display – double-spaced dot matrix liquid crystal screen enabling values to be read easily.
• Easy Maintenance – An audible alarm which alerts the user in case of any malfunction.
• Special Working Mode –Availability of PEAK value reading mode, enables RAD-501 to be also utilized as a peak detector. Thus it is easier to take measurements in areas with high radiation where even small amounts of exposure would be life-threatening for the user. Dose accumulation is continuously made during the PEAK value reading mode, and the peak value and average value measured can be later read in a safer environment. In the automatic calibration mode, two separate energy sources placed in front of the detector are scanned and values obtained are  transferred to the memory via the micro processor, thus enabling automatic calibration.
• Dose accumulation
• Threshold selection
• Measurement duration can be selected as desired utilizing the keys.

2829 Sk. No:21 1. Sanayi Sitesi İzmir/TÜRKİYE
GSM : +90.532.507 5767    +90 535 450 6204

info@isinelektronik.com